Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    389 mpu 6050 jobs found, pricing in USD

    As an audiophile seeking superior sound quality, I'm looking ...sustainable power supply integration will be critical to fulfilling this role successfully. Previous experience with DAC design and an understanding of audio signal transmission will be highly beneficial. Design and Build a Streaming Board with DAC prototype Qualifications: -must know Xcode, Sharc -design with LTSpice, MATLAB, Vivaldi -must have Distortion Analyzer, frequency sweeps -software/hardware/MPU programming skills -be able to build a prototype board totally functional -compile code -Simulate Analog / Digital signals Regarding hardware -Arm chip with Powerline network stack -Recover 44.1 khz clock using 22.5792 MHz oscillator -DAC, 2x oversampling using Sharc or FIR filter (to be discussed) -1w Class A...

    $2454 (Avg Bid)
    $2454 Avg Bid
    11 bids

    As an audiophile seeking superior sound quality, I'm looking for a dedicated expert to design ...Proficiency in circuit design, audio technology, and sustainable power supply integration will be critical to fulfilling this role successfully. Previous experience with DAC design and an understanding of audio signal transmission will be highly beneficial. Qualifications: -must know Xcode -design with LTSpice, MATLAB, Vivaldi -must have Distortion Analyzer, frequency sweeps -software/hardware/MPU programming skills -be able to build a prototype board totally functional -compile code -Simulate Analog / Digital signals Regarding hardware -Arm with Wi-Fi only -Recover 44.1 khz clock using 22.5792 MHz oscillator -DAC (to be discussed) -2x oversampling FIR filter 96 taps -1w Class A ...

    $2260 (Avg Bid)
    $2260 Avg Bid
    29 bids

    I'm in search of an experienced coder to develop an Arduino program that can facilitate communication between ESP32 and MPU-6050 devices. Here are some of the specific requirements: when the MPU-6050 and ESP32 are put across each other in "90-degree angle in the XYZ plane", the computer program (coding) shows a green light on the screen and “preferably” makes a beeping sound. Ideal applicants would possess a strong background in Arduino coding and have specific experience in device communication projects.

    $38 (Avg Bid)
    $38 Avg Bid
    22 bids

    As an audiophile seeking superior soun...Proficiency in circuit design, audio technology, and sustainable power supply integration will be critical to fulfilling this role successfully. Previous experience with DAC design and an understanding of audio signal transmission will be highly beneficial. Qualifications: -must know Xcode -design with LTSpice, MATLAB, Vivaldi -must have Distortion Analyzer, frequency sweeps -software/hardware/MPU programming skills -be able to build a prototype board totally functional -compile code -Simulate Analog / Digital signals -Sharc DSP Regarding hardware -Arm with Wi-Fi only -Recover 44.1 khz clock using 22.5792 MHz oscillator -DAC (to be discussed) -Sharc DSP upsampler -3w Class A push pull Amplifier Regarding software -Use best software volume ...

    $3195 (Avg Bid)
    $3195 Avg Bid
    18 bids

    As an audiophile seeking superior sound quality, I'm looking for a ded...Proficiency in circuit design, audio technology, and sustainable power supply integration will be critical to fulfilling this role successfully. Previous experience with DAC design and an understanding of audio signal transmission will be highly beneficial. Qualifications: -must know Xcode -design with LTSpice, MATLAB, Vivaldi -must have Distortion Analyzer, frequency sweeps -software/hardware/MPU programming skills -be able to build a prototype board totally functional -compile code -Simulate Analog / Digital signals Regarding hardware -Arm with Wi-Fi only -Recover 44.1 khz clock using 22.5792 MHz oscillator -DAC (to be discussed) -3w Class A push pull Amplifier Regarding software -Use best software vo...

    $2153 (Avg Bid)
    $2153 Avg Bid
    14 bids

    I am looking for a freelancer to help me design a circuit that can read an angle from a CJMCU-103 or similar sensor and display it as only one illuminated LED in a strip of 41 LED's. The circuit should have the following features: Sensor: MPU-6050 or similar angle sensor. Resolution: The desired resolution for the angle measurement should be adjustable via a trimpot. Alternatively if it is done using an arduino or something similar, we need the ability to set a resolution as our row of LED's will be along side a scale that shows the mm of tilt on the length of the device. LED's: A row of 41 individual LED's in Varying colours (green, yellow and red) Calibration: A second trimpot for adjusting the "zero point" once it is installed in the devi...

    $379 (Avg Bid)
    $379 Avg Bid
    37 bids

    Need to create a blueprint and program in Unreal Engine 5.1.1 with the ESP32-WROOM-32E and MPU-6050 inertial measurement unit sensor to display, read, and orientate arm movement using SerialCOM. WIFI or Bluetooth application is not needed.

    $102 (Avg Bid)
    $102 Avg Bid
    11 bids

    I am looking for someone to assist me in programming an ESP32-S3 based Line following robot which uses GPS+MPU6050 module/similar. I have made the code to soe extent and need to get it completed. The lines wouldn't be straight and would be similar to that in roads. The line following robot should get to the desired location by fol... The line following robot should get to the desired location by following the lines and should work in line junctions where it will use GPS and the MPU6050 (compass+accelerometer) to turn to the desired location. The data will be then stored in the SD card. Blynk app will be used for turn on and off and to set the waypoint. Detailed explanation will be given in chat. Sensors used: ESP32-S3 MPU-6060/ BMI270+QST Compass IC GPS module 2 IR modul...

    $15 (Avg Bid)
    $15 Avg Bid
    6 bids

    I am looking for someone to design and provide both the wire diagram and coding for an Arduino board that has two 50kg pressure sensors (such as those used in weight scales), an MPU 6050, and a Bluetooth connection. The output should show the value of the weight being put on the pressure sensors and display the axes of the board using the MPU6050. The output will ideally look something like the attached where the blue rectangles are showing the angle of the board as it is moved, and the pressure sensors are each displaying their independent values. If this output can be done via the bluetooth connection to a phone, that would be great. If not, an output to the Arduino IDE is fine too. Either Arduino UNO or Nano are ok; whichever works better for the design. Design and code sh...

    $524 (Avg Bid)
    NDA
    $524 Avg Bid
    30 bids

    I'm looking for someone who can help me develop an embedded MPU based tilt sensing system that utilizes an accelerometer / ICM-42688-P to sense the tilt angle up to 0.1 degree accuracy and a maximum of 360 degrees. It's important to me that it supports both internal and external sensors, and that it has real-time data logging capabilities. I'm expecting the full development of the system to be completed in a timely manner. I would also like guidance throughout the process, as well as regular updates on the progress. Furthermore, I'm looking for robustness and reliability in the system, as it will be used in varying conditions. Thanks for your consideration!

    $912 - $1824
    Sealed
    $912 - $1824
    1 bids

    I want someone to help with the schemes of induction furnaces for melting metals, aluminum, copper, iron, made in China by main card MPU-2FK or MPU-6FK with the right equipment selection SCR,DC-Choke, snubber,capacitor,coil,

    $162 (Avg Bid)
    $162 Avg Bid
    5 bids

    I need a pcb project, the models to be inspired when making the pcb are attached, as well as a description of how the project should be done. Project description: The pcb project will be used for a set of vibration sensors (Accelerometer Module with MPU chip made directly on the board), temperature (off board) and current (off board) MPU6050 has to be in the middle of the board, and you have to connect the SDA AND SCL input of the temperature sensor and the vibration sensor to the TCA9548. Need a 2-pin molex type battery terminal, and a 4-pin molex type temperature sensor terminal, and a terminal 3 molex pins for the current sensor, the latter being necessary to have 5 volts on the first pin, gordond on the second pin and the third pin has must be connected to the atmega analo...

    $130 (Avg Bid)
    $130 Avg Bid
    29 bids

    detect tilt and apply vibration in direction of the tilt using arduino nano, mpu 6050, and piezos.

    $464 (Avg Bid)
    $464 Avg Bid
    28 bids

    I want an image showing Australian Politician (Bill Shorten who is the NDIS minister for ...Australian Politician (Bill Shorten who is the NDIS minister for disabilities) putting an iranian woman in chains whilst the world supports iranian women during this time and australia is pretending to support Iranian woman. !&&p=614afddb4c19d2adJmltdHM9MTY3MDI4NDgwMCZpZ3VpZD0yODhmN2I1Ni1kOTU3LTYwNTAtMDMzOC02OTEyZDg5NDYxMzUmaW5zaWQ9NTE3Ng&ptn=3&hsh=3&fclid=288f7b56-d957-6050-0338-6912d8946135&psq=vida+reid+accused&u=a1aHR0cHM6Ly93d3cuYWJjLm5ldC5hdS9uZXdzLzIwMjItMTEtMDkvYmlsbC1zaG9ydGVuLXZvd3MtdG8tdHJhY2stZG93bi1uZGlzLXJvcnRlcnMvMTAxNjMzNDg0&ntb=1

    $67 (Avg Bid)
    Guaranteed
    $67
    22 entries

    Write and integrate compatible code to replace the PWM rotary encoder input with a PWM input from a MPU 9250 9 DoF breakout board in the following Adriano sketch. #include <Servo.h> // Rotary Encoder Inputs #define inputCLK 4 #define inputDT 5 // Create a Servo object Servo myservo; int counter = 90; int currentStateCLK; int previousStateCLK; void setup() { // Set encoder pins as inputs pinMode (inputCLK, INPUT); pinMode (inputDT, INPUT); // Setup Serial Monitor (115200); // Attach servo on pin 9 to the servo object (9); // Read the initial state of inputCLK // Assign to previousStateCLK variable previousStateCLK = digitalRead(inputCLK); } void loop() // Read the current state of inputCLK {currentStateCLK = digitalRead(inputCLK);

    $465 (Avg Bid)
    $465 Avg Bid
    29 bids

    I am looking for an embedded expert who can design and develop a three camera 1080P board. You will select a development board with three camera / CSI-MIPI ports (you can suggest alternative ways) The MPU must have an inbuilt ISP for handling tasks like EIS, HDR/WDR etc. you must have experience on camera and multimedia projects using V4L2, GST etc. Bid only if you have relevant experience. All the best.

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    8 bids

    HI, we have existing ESP32 firmware. https://www.amazon.com/gp/product/B08246MCL5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The main tasks are: 1) D...We'd prefer to run the ESP32 at 80MHz. For some reason the MPU6050 is not recognized at that frequency. 2) MPU5060 gives non-sensical values and is only read out every few seconds, even though it should be read out at 10Hz. Future developments Mainly the data module, i.e. storing data and pulling it from the SD card module, then displaying it on the UI. We are trying to get the debugging of the MPU stuff done asap, like this week. Further development has more time, we can ship upgraded firmware to users as firmware file and then have them run OTA upgrades. More details, please ask. Existing code will be shared of ...

    $30 - $250
    Sealed
    $30 - $250
    21 bids

    Predicting the pose of a 4 wheeled robot using Mpu data and LIDAR sensor . The programming language will be Python. I am already getting the data from the sensors the task is to combine them using the ekf algorithm.

    $215 (Avg Bid)
    $215 Avg Bid
    24 bids

    We would like 8 banner ads created. 2 for each of the following sizes: - Leaderboard: 728px wide x 90px high - Billboard: 970px wide x 250px high - DMPU/HPU: 300px wide x 600px high - MPU: 300px wide x 250px high Format: JPG, GIF, third-party HTML, JavaScript OR DoubleClick Tag Max file size: 1Mb Deadline: Final approved designs needed on 13th July. We have the copy and the images available. Please send through examples of animated banners you have created before.

    $128 (Avg Bid)
    $128 Avg Bid
    46 bids

    We have a central unit with an nrf905 module and an existing puck combi antenna that needs communication with a remote control with another nrf905 module or pcb mounted nrf905 with preferably PCB integrated antenna. We use the 868MHz band. We will provide the electronics, design files,...CADint for the designs, but we can receive the modifications and modify our existing designs ourselves. We need approximately a range of at least 150m. The packet system uses 32bit adressing, 8 bytes data and CRC. We need someone with a proven record of RF design skills and payment will be upon successful implementation and production of the modified system. The systems is based on atmel2560 mpu using microchip studio and jtag programming/debugging. Items must be returned upon finishe...

    $1125 (Avg Bid)
    $1125 Avg Bid
    8 bids

    ...exchange of this lib is necessary. That means the interfaces should remain as they are. UTIL.h does not have to be translated, but only the function "Print_Info(". The Libs (Reading Sensors and Calibrate MPU) essentially performs the following tasks: Reading of three sensors: -MPU6050 (DMP) -DS18B20 -Analogue Input Calibrating MPU. The two libraries can also be merged, the only important thing is that I also get the offset back from the lib (so that this can be stored persistently). I then need a main that checks the sensors. The program should calibrate the MPU once and then read the DS18B20, the MPU6050 and the voltage cleanly. It is important that the call parameters remain the same and that the offset is also transferred. Wi...

    $230 (Avg Bid)
    $230 Avg Bid
    11 bids

    Referencing the 434 postcodes within I need to know how many of those postcodes fit into the 18 categories within I.e. 4053 is in the 4029-4068 range within which relates to QLD Capital 6100 is in the 6090-6110 range within which relates to WA Capital 6055 is in the 6050-6066 range within which relates to WA Capital So the result would be: QLD Capital: 1 WA Capital: 2 Can you please provide the # of postcodes in each 18 categorles: NSW Capital: X NSW Metro: X NSW Remote: X VIC Capital: X VIC Metro: X VIC Remote: X QLD Capital: X QLD Metro: X QLD Remote: X SA Capital: X SA Metro: X SA Remote: X TAS Metro: X TAS Remote: X OTHER Remote: X

    $14 (Avg Bid)
    $14 Avg Bid
    6 bids

    (Only on Full Time Basis : 8 Hours per Day)---->Microprocessor based Board Development and Firmware is done and now application layer need to be developed for MPU requirements. Development will be using C language and Operating System is Yocto Linux. I have not provided MPU chip name as we are OK to train the person if he/she is aware of C programming and Yocto development platform. Since Hardware is available at Pune and Ahmedabad only, we need you to work from either Pune or Ahmedabad location.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    Looking for a Logo and Font combination for our Mobile Prayer Unit. Brand identity with colours, primary and secondary fonts. Simple and modern design. Our Logo needs to have the letters MPU integrated. "Heal and Deliver" tagline can be added as an option. Vision mock-up attached below.

    $48 (Avg Bid)
    $48 Avg Bid
    71 bids

    Task: You will be given a list of 6050 Japanese names in Excel sheet. You need to record them with good quality (high bitrate, clear, no background, etc) and send back. Note: 1- You must be a native Japanese speaker. 2- You must be educated enough to know the correct pronunciation of the names. 3- You must have a strong woman voice suitable for voice acting 4- Name should be pronounced clearly, with 1 second pauses between the names. Names should be recorded in one hundred batches.

    $114 (Avg Bid)
    $114 Avg Bid
    14 bids

    Using Atmega328p as a microcontroller, the data are collected from RTC and MPU to the SD card at a frequency higher than 20 Hz. Over time, frequency start's to drop as a flashcard is fulfilling. Advice is needed for the script modification to gain stable recording frequency to the SD card.

    $204 (Avg Bid)
    $204 Avg Bid
    8 bids

    I need an electric schematic on eagle cad. using a Arduino Uno, GARMIN lidar sensor v3, and MPU-6050 Module. I would need by December 6 7pm eastern time. the pins are as follow Connections: LIDAR-Lite 5 Vdc (red) to Arduino 5v LIDAR-Lite Ground (black) to Arduino GND LIDAR-Lite Mode control (yellow) to Arduino digital input (pin 3) LIDAR-Lite Mode control (yellow) to 1 kOhm resistor lead 1 1 kOhm resistor lead 2 to Arduino digital output (pin 2) Power Enable (orange) to pin 8 of Arduino (Capacitor recommended to mitigate inrush current when device is enabled) 680uF capacitor (+) to Arduino 5v 680uF capacitor (-) to Arduino GND See the Operation Manual for wiring diagrams and more information:

    $318 (Avg Bid)
    $318 Avg Bid
    3 bids

    Can you do the following tasks and find the correct Main function in the tasklist array using Ghidra? 1) Follow the steps described at under “Getting started with Shannon Firmware” 2) Understand the internal operation of the ShannonLoader: a) TOC parsing b) MPU region parsing c) Scatter Loading 3) Identify the Location of the TaskList-Array: a) Find a correctly identified MainFunction for any task, using the function names b) Search for the bytes of the function entry address (including thumb-bit) to find references in the baseband firmware c) If a match is found, check if this could be from a TaskEntry inside the TaskList-array 4) Create a TaskEntry structure and apply it to the TaskListArray 5) Using the TaskList, finding the entry of the

    $250 - $250
    $250 - $250
    0 bids

    Can you do the following tasks and find the correct Main function in the tasklist array using Ghidra? 1) Follow the steps described at under “Getting started with Shannon Firmware” 2) Understand the internal operation of the ShannonLoader: a) TOC parsing b) MPU region parsing c) Scatter Loading 3) Identify the Location of the TaskList-Array: a) Find a correctly identified MainFunction for any task, using the function names b) Search for the bytes of the function entry address (including thumb-bit) to find references in the baseband firmware c) If a match is found, check if this could be from a TaskEntry inside the TaskList-array 4) Create a TaskEntry structure and apply it to the TaskListArray 5) Using the TaskList, finding the entry of the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    Can you do the following tasks and find the correct Main function in the tasklist array using Ghidra? 1) Follow the steps described at under “Getting started with Shannon Firmware” 2) Understand the internal operation of the ShannonLoader: a) TOC parsing b) MPU region parsing c) Scatter Loading 3) Identify the Location of the TaskList-Array: a) Find a correctly identified MainFunction for any task, using the function names b) Search for the bytes of the function entry address (including thumb-bit) to find references in the baseband firmware c) If a match is found, check if this could be from a TaskEntry inside the TaskList-array 4) Create a TaskEntry structure and apply it to the TaskListArray 5) Using the TaskList, finding the entry of the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    Can you do the following tasks and find the correct Main function in the tasklist array using Ghidra? 1) Follow the steps described at under “Getting started with Shannon Firmware” 2) Understand the internal operation of the ShannonLoader: a) TOC parsing b) MPU region parsing c) Scatter Loading 3) Identify the Location of the TaskList-Array: a) Find a correctly identified MainFunction for any task, using the function names b) Search for the bytes of the function entry address (including thumb-bit) to find references in the baseband firmware c) If a match is found, check if this could be from a TaskEntry inside the TaskList-array 4) Create a TaskEntry structure and apply it to the TaskListArray 5) Using the TaskList, finding the entry of the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    Can you do the following tasks and find the correct Main function in the tasklist array using Ghidra? 1) Follow the steps described at under “Getting started with Shannon Firmware” 2) Understand the internal operation of the ShannonLoader: a) TOC parsing b) MPU region parsing c) Scatter Loading 3) Identify the Location of the TaskList-Array: a) Find a correctly identified MainFunction for any task, using the function names b) Search for the bytes of the function entry address (including thumb-bit) to find references in the baseband firmware c) If a match is found, check if this could be from a TaskEntry inside the TaskList-array 4) Create a TaskEntry structure and apply it to the TaskListArray 5) Using the TaskList, finding the entry of the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    ...(in % or deg, whatever feasible) Display left / right deviation from the level (as above) Error messages (e.g. if unable to level, battery low, etc.). Use the Following sensors / accessories: ELEGOO Nano Board CH340/ATmega+328P W, Compatible with Arduino Nano V3.0 GeeekPi I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 AEDIKO MPU6050 MPU-6050 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino Tongue jack is 12V. Proper relays should be used. Nice to have: Ability to read data from two sensors (sensors located in a different part of a trailer). ...

    $163 (Avg Bid)
    $163 Avg Bid
    21 bids

    Hello everyone, Today I would like to have an arduino sketch done. Project assumptions: - GY-91 sensor (MPU9250), - Ublox NEO-M8N GPS, - motor control (), - 2x 12V DC motor Required: Auto Calibration of the Magnetometer Filtering output of the sensors to convert them to Quaternions (Madgwick / Mahony / Kalman) Data Averaging Like this: GPS signal filtering algorithm with Kalman Filter or other. I would like the GPS and sensor data to be linked so that the boat travels in a straight line. I would like to be able to enter the coordinates into the arduino sketch, e.g. 50.392420, 18.453845 and the two-engine boat is to reach this point in a straight line. 3m before the target point, the boat should slow down and before the point, turn off the engines and complete the mission. I don'...

    $153 (Avg Bid)
    $153 Avg Bid
    11 bids

    We are looking for code to generate the signals (as seen in signal.jpg-attached) on GPIO pins of iMX8 microprocessor. The clock frequency is 25Mhz With a delay starting at 7 Nano Seconds and going up to 625 Nano Seconds, with 40 clock pulses finishing within 2.38micro seconds. In the diagram attached, ts width= 625ns, ts1-s2 delay=150ns, ts-p delay=42.5ns More details will be shar...frequency is 25Mhz With a delay starting at 7 Nano Seconds and going up to 625 Nano Seconds, with 40 clock pulses finishing within 2.38micro seconds. In the diagram attached, ts width= 625ns, ts1-s2 delay=150ns, ts-p delay=42.5ns More details will be shared with whomever is chosen. We need a quick turn around, output needed in 1week maximum. Coding language has to be C/C++ and OS on MPU...

    $388 (Avg Bid)
    $388 Avg Bid
    6 bids

    I have a hobby project that I am working with and now could use some help. Having successfully small scaled the project I wish to supersize it. Essentially I am working with an inverted pendulum (self balancing robot). I am stuck at the point of integrating a large stepper motor (closed loop) into the system. Effectively I have an Arduino Nano, MPU 6050, Single axis (roll), Kalman filtering, Operating max/min limits <> roll angle, PID, Serial Plotter, Closed loop Stepper motor/driver/encoder. I cannot make all work together seamlessly in an orderly way. Can you help?

    $347 (Avg Bid)
    $347 Avg Bid
    16 bids

    write an Arduino uno programing code that reads data from an accelerometer(MPU-6000) to detect free falling and signals a vibrating motor?

    $138 (Avg Bid)
    $138 Avg Bid
    20 bids

    MPI programming project. Great load balancing programmer experienced in MPU programming required for this project

    $112 (Avg Bid)
    $112 Avg Bid
    10 bids

    MPI programming project. Great load balancing programmer experienced in MPU programming required for this project

    $195 (Avg Bid)
    $195 Avg Bid
    4 bids

    MPI programming project. Great load balancing programmer experienced in MPU programming required for this project

    $85 (Avg Bid)
    $85 Avg Bid
    5 bids

    MPI programming project. Great load balancing programmer experienced in MPU programming required for this project

    $27 (Avg Bid)
    $27 Avg Bid
    2 bids

    MPI programming project. Great load balancing programmer experienced in MPU programming required for this project

    $159 (Avg Bid)
    $159 Avg Bid
    8 bids

    Need an embedded engineer to program a MKRZero to wake on motion, from sleep, when motion is detected from MPU 6050 and play audio tracks from MKRZero's onboard SD Card. Audio tracks need to play for: 1.) at least 1 track and, 2.) keep playing track after track while motion is detected only stop playing when motion is no longer above threshold, at which point, MKRZero returns to sleep. (if possible make the threshold for "motion" easy to change) Needs to be written for Arduino IDE or Atmel Studio 7. Below are some simple examples to help (if needed) - Simple audio player MKRZero: (This is how I wired up speaker, so code may just need copied) - Read SD Card MKRZero:

    $446 (Avg Bid)
    $446 Avg Bid
    16 bids

    We are looking for a C language expert for converting 6 'C' programs to test bench. We need the output as C codes. We will provide C codes for Bluetooth (HC-05), PPG (MAX30100), Display (SSD1306), Gyro accelerometer (MPU 6050), Temperature (DS18B20) and RTC (DS3231) with display.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    3 bids

    ...function. Key Skills / Experience Bachelor Degree in (Electrical/Electronics/Telecommunication/Computer Engineering) or equivalent. Software development experience in requirement analysis, architecture, design, coding and testing of embedded system. At least 3 years experience with C / C++, UML, Python. Experience in embedded real-time software engineering, e.g. FreeRTOS. Good knowledge of MCU/MPU architecture and its common peripherals. Experience in configuration and use of sensor devices over I2C, SPI, UART with DMA. Experience in on and off target test harness, such as Ceedling, Behave, etc. Good understanding of software development life cycles (Agile) and basic electronics hardware (interface to software systems). Familiar with embedded development tools (emulators, debug...

    $394 (Avg Bid)
    $394 Avg Bid
    4 bids

    Whenever i upload a product on my site it's product id is generated randomly so, i want to make a custom format so that new products id will be created on those format example :- currently i get id as 6050, 6243 but i want that it will starts from my custom format like (wfa101) and continue to all other products we upload like WFA101, WFA102.

    $13 (Avg Bid)
    $13 Avg Bid
    9 bids

    I need an Esp8266 NodeMCU based project code. This project includes 3major systems, 1st Fuel indication system. In this system, I'm going to use ultrasonic sensor (HC-SR04). With this I need exact value of fuel with proper indication. 2nd Systems is accidental alert system. In this system, I'm going to implement accelerometer (MPU-6050 Gyroscope Accelerometer Sensor) and GPS module (Ublox NEO-6M GPS Module ) so that if any accident appears, it will directly send data to another person/hospital. 3rd system is nothing but IOT system, like whatever input coming form the sensors/ modules it should send notification that accident is appeared and he need medical support. And yes, i need this project in python or C language. That's it from my side. If any quarries, ...

    $134 (Avg Bid)
    $134 Avg Bid
    13 bids

    I'm looking for an electronic engineer who has rich experience in video doorbell schematic and PCB design. Main components are selected already and main controller is R9A07G044L13GBG#AC0 from Renesas company. If you have experience in this MPU, please apply and PCB tools should be Altium designer. Start your bid "RZ/2GL", so I'm sure you read all job posting. Regards

    $33 / hr (Avg Bid)
    $33 / hr Avg Bid
    12 bids

    Need to do coding for Arduino we need to get data from rtc and it should be with mpu6050 data and that thing should produce data continuesly and it should be stored in sd card module. I already have mpu 6050 code and rtc code working so now just need to merge this code and store in sd card module. Circuit is already made.

    $12 (Avg Bid)
    $12 Avg Bid
    10 bids